You need to prepare the following items.

Camera Board	Original manufacturer's transfer cable (if using other cables, please ensure they have transfer capability).	Computer with Windows OS
SD Card Reader & SD Card Please make sure to use a card reader to access files.	Charger or portable power bank. Do not use computer power supply, as it may not provide sufficient voltage and could result in non-operation.

Check Before Use

Confirm that the Micro SD Card is inserted into the adapter and is unlock.

 

1.Format the SD with the following setting:

*Right-click on your memory card or hard drive.

*Select the Fat32 (Default) format.

*Press OK to erase all data on the SD card.

 

2.Download the latest firmware update.

Download

3.Unzip the " FW96565A.bin " files to the memory card.

 

4.Insert the SD card with "FW96565A.bin" files into the camera.

5.Plug the camera into the power source and pay attention to the indicator light.

**Please be especially cautious not to use a computer or laptop as the power source.

 

6.Wait until the light flashes and remains steady (approximately 1-3 minutes). #Please be patient.

 

7.After the update is completed, use the "card reader" to remove all files from the SD card.

Please double-check to ensure that there are no files on the memory card. If files are not deleted, you will need to repeat step 5.

8.Enjoy your Papershoot camera!